Medical pump pistons and valves
Pistons, cylinders, and valve parts for dialysis, infusion, and laboratory pumps.
Product family
Ceramic parts for medical and food equipment
Ceramic pistons, valves, filling parts, blades, and wear parts for medical devices, laboratory instruments, and food processing equipment where corrosion, hygiene, and wear matter.
Product overview
What we make and how it is reviewed
Medical and food equipment uses ceramic parts because they resist corrosion from cleaning agents, do not rust, and wear slowly against fluids and food. Zirconia and high-purity alumina are the usual choices.
Typical requests include dialysis and laboratory pump pistons and valves, food filling pump and valve parts, beverage dispensing valves, ceramic parts for meat grinders and food cutting, and wear parts in packaging and processing machines.
Material declarations, cleaning, and packaging are part of the requirement. The finished part does not certify the device or machine; state the documents you need so they can be confirmed in the quotation.
Product types
Part types we quote to drawing
These are made to customer drawings or samples, not sold from stock. Final material, route, and acceptance are confirmed for each drawing.
Food filling and dispensing parts
Filling pistons, valves, and nozzles for food and beverage machines.
Cutting and grinding parts
Ceramic cutting plates and grinder parts for food processing.
Machine wear parts
Guides, sleeves, and pins in packaging and processing machines.
Decision map
Requirements that change machining and quotation
Use the final column as a drawing and RFQ check. A requirement is easier to review when its function and acceptance evidence are stated together.
| Requirement | Why it changes the route | What to define in the RFQ |
|---|---|---|
| Material declarations | Food-contact and medical uses often need composition or compliance documents. | List the declarations or test reports needed and the applicable regulation. |
| Cleaning and packaging | Residues and particles must be controlled before parts enter the device. | Specify cleaning standard, packaging, and labelling. |
| Running fits and finish | Pump and valve performance depends on clearance and surface finish. | Define fits, Ra, and how parts are matched or tested. |
Material paths
Select against the failure mode
Zirconia
Tough, polishable, and common for pistons, blades, and valve parts.
High-purity alumina
Hard and chemically stable for valve plates, cylinders, and seats.
Quote-ready package
Information to send for review
- 1 Drawings or samples and the equipment type.
- 2 Medium, cleaning agents, and temperature.
- 3 Fits, finish, and functional tests.
- 4 Material declarations and documents required.
- 5 Cleaning, packaging, quantity, and timing.
Engineering guides
Continue by component, material, or acceptance problem
Each guide below narrows one part family or manufacturing constraint and leads back to the drawing information needed for review.
Precision Ceramic Pump and Valve Components for Corrosive Fluid Control
Design and RFQ guide for ceramic pump and valve components used in corrosive, abrasive, high-purity, and vacuum fluid systems, including SiC seal faces, zirconia balls, alumina seats, plungers, sleeves, lapping, and inspection.
Ceramic Fluid-Path Components for Analytical Instruments
RFQ guide for ceramic needles, plungers, valve parts, flow cells, and micro-nozzles where carryover, dead volume, media, sealing, cleaning, and inspection must be defined.
Precision Ceramic Components for Cleanroom and High-Purity Manufacturing Systems
Engineering RFQ guide for precision ceramic components used in cleanroom and high-purity manufacturing systems, covering alumina, zirconia, SiC, AlN, nozzles, sleeves, spacers, rings, plates, cleaning, packaging, inspection evidence, and qualification boundaries.
Questions before quotation
Product RFQ FAQ
Are the ceramic parts food-grade or medical-grade certified?
Certification is not implied. State the documents you need, such as composition declarations or migration tests, so availability can be confirmed before order.
Engineering RFQ
Send your drawing and ceramic requirements for engineering review
Start with the part function, material or grade if known, quantity, and the critical requirements; an early-stage brief is enough to begin. If online submission is interrupted, the form prepares the same RFQ as an email instead.
- Useful files: STEP/STP, X_T/X_B, IGES, STL, or PDF drawings.
- Upload limit: up to 3 files, 5 MB each, 8 MB total.
- Sensitive projects: do not send export-controlled, classified, or restricted data before an approved handling agreement is in place.
Prefer to use your own email?
RFQ email: info@szcomo.com
RFQ email prepared
Send it from your email app
Your email app should now show a message to info@szcomo.com with these details. Attach CAD or drawings and press send. If nothing opened, copy the text below into an email to info@szcomo.com.